SN75196 Datasheet | Texas Instruments

description The SN75196 bines five drivers and three receivers from the trade-standard SN75188 and SN75189 bipolar quadruple drivers and receivers, respectively. The flow-through design of the SN75196 decreases the part count, reduces the board space required, and allows easy interconnection of the UART and serial-port connector. The all-bipolar circuits and processing of the SN75196 provide a rugged, low-cost solution for this function. The SN75196 plies with the requirements of TIA/EIA-232-F and ITU (formerly CCITT) V.28 standards. These standards are for data interchange between a host puter and peripheral at signal rates of up to 20 kbit/s. The switching speeds of the SN75196 are fast enough to support rates of up to 120 kbit/s with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be assured unless the designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling rates of up to 120 kbit/s, use of TIA/EIA-423-B (ITU V.10) and TIA/EIA-422-B (ITU V.11) standards are remended. The SN75196 is characterized for operation over a temperature range of 0°C to 70°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. - POST OFFICE BOX 655303 DALLAS, TEXAS 75265 Copyright © 1998, Texas Instruments Incorporated 1 SN75196 MULTIPLE RS-232 DRIVERS AND RECEIVERS SLLS188B - MAY 1995 - REVISED APRIL 1998 logic symbol† 2 1DA 3 2DA 4 3DA 5 1RY 6 2RY 7 4DA 8 3RY 9 5DA 19 1DY 18 2DY 17 3DY 16 1RA 15 2RA 14 4DY 13 3RA 12 5DY † This symbol is in accordance with ANSI/IEEE Std 91-1984...