SN75ALS160 Datasheet | Texas Instruments

description /ordering information The SN75ALS160 eight-channel general-purpose interface bus transceivers are monolithic, high-speed, advanced low-power Schottky (ALS) devices designed for two-way data munications over single-ended transmission lines. This device is designed to meet the requirements of IEEE Standard 488 - 1978. The transceivers feature driver outputs that can be operated in either the passive-pullup or 3-state mode. If talk enable (TE) is high, these ports have the characteristics of passive-pullup outputs when pullup enable (PE) is low and of 3-state outputs when PE is high. Taking TE low places these ports in the high-impedance state. The driver outputs are designed to handle loads up to 48 m A of sink current. An active turn-off feature has been incorporated into the bus-terminating resistors so that the device exhibits a high impedance to the bus when VCC = 0. When bined with the SN75ALS161 or SN75ALS162 bus management transceiver, the pair provides the plete 16-wire interface for the IEEE - 488 bus. The SN75ALS160 is characterized for operation from 0°C to 70°C. ORDERING INFORMATION PACKAGE† ORDERABLE PART NUMBER TOP-SIDE MARKING PDIP (N) Tube of 20 SN75ALS160N SN75ALS160N 0°C to 70°C SOIC (DW) Tube of 25 SN75ALS160DW Reel of 2000 SN75ALS160DWR 75ALS160 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at .ti./sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. - POST OFFICE BOX 655303 DALLAS, TEXAS 75265 Copyright  2004, Texas Instruments...