Texas Instruments TAS5352
The TAS5352 is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4-Ω bridge-tied load (BTL) at up to 125 W per channel with low harmonic distortion, low integrated noise, and low idle current. The TAS5352 has a complete protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These protection features are short-circuit protection, over-current protection, under voltage protection, over temperature protection, and a loss of PWM signal (PWM activity detector).| Part No. | TAS5352 |
|---|---|
| Datasheet | TAS5352 Download |
| Manufacturer |  Texas Instruments |
| Description | 125W STEREO DIGITAL AMPLIFIER |
| Buy | Stock & Price |
FEATURES
1●23 Total Power Output (Bridge Tied Load) – 2 × 125 W at 10% THD+N Into 4 Ω – 2 × 100 W at 10% THD+N Into 6 Ω
● Total Power Output (Single Ended) – 4 × 45 W at 10% THD+N Into 3 Ω – 4 × 35 W at 10% THD+N Into 4 Ω
● Total Power Output (Parallel Mode) – 1 × 250 W at 10% THD+N Into 2 Ω – 1 × 195 W at 10% THD+N Into 3 Ω
● >110 dB SNR (A-Weighted With TAS5518 Modulator)
● <0.1% THD+N (1 W, 1 kHz)
● Supports PWM Frame Rates of 192 kHz to 432 kHz
● Resistor-Programmable Current Limit
● Integrated Self-Protection Circuitry, Including: – Under Voltage Protection – Overtemperature Warning and Error – Overload Protection – Short-Circuit Protection – PWM Activity Detector
● Standalone Protection Recovery
● Power-On Reset (POR) to Eliminate System Power-Supply Sequencing
● High-Efficiency Power Stage (>90%) With 80-mΩ Output MOSFETs
● Thermally Enhanced 44-Pin HTSSOP Package (DDV)
● Error Reporting, 3.3-V and 5.0-V Compliant
● EMI Compliant When Used With Recommended System Design APPLICA...
