TAS5754M
Overview
The TAS5754M device is a high-performance, stereo closed-loop amplifier with integrated audio processor with PurePath™ HybridFlow architecture. To convert from digital to analog, it uses a high performance DAC with Burr-Brown® mixed signal heritage.
- 1 Flexible Audio I/O Configuration - Supports I2S, TDM, LJ, RJ Digital Input - 8 kHz to 192 kHz Sample Rate Support - Stereo Bridge Tied Load (BTL) or Mono Parallel Bridge Tied Load (PBTL) Operation - BD Modulation with TAS5756M, 1SPW Modulation with TAS5754M - Supports 3-Wire Digital Audio Interface (No MCLK required)
- High Performance Closed-Loop Architecture (PVDD = 12V, RSPK = 8 Ω, SPK_GAIN = 20dBV) - Idle Channel Noise = 62 µVrms (A-Wtd) - THD+N = 0.007 % (at 1 W, 1 kHz) - SNR = 103 A-Wtd (Ref. to THD+N = 1%)
- PurePath™ HybridFlow Processing Architecture - Several Configurable MiniDSP Programs (called HybridFlows) - Download Time <100 ms (typ) - Advanced Audio Processing Algorithms
- Communication Features - Software Mode Control via I2C Port - Two Address Select Pins - Up to 4 Devices
- Robustness and Reliability Features - Clock Error, DC, and Short-Circuit Protection - Over Temperature and Overcurrent Protection
