Datasheet4U Logo Datasheet4U.com

TCA6418E - I2C CONTROLLED 18 CHANNEL GPIO EXPANDER

General Description

The TCA6418E is a 18 channel GPIO expansion device with integrated ESD protection.

It can operate from 1.65 V to 3.6 V and has 18 general purpose inputs/outputs (GPIO) that can be used via the I2C interface [serial clock (SCL), serial data (SDA)].

Key Features

  • 1.
  • Operating Power-Supply Voltage Range of 1.65 V to 3.6 V.
  • 18 GPIOs Configurable as Inputs or Outputs.
  • ESD Protection Exceeds JESD 22 on NonGPIO Pins.
  • 2000-V Human Body Model (A114-A).
  • 1000-V Charged Device Model (C101).
  • Low Standby (Idle) Current Consumption: 3 μA.
  • Supports 1-MHz Fast Mode Plus I2C Bus.
  • Open-Drain Active-Low Interrupt Output, Asserted When Key is Pressed or Key is Released.
  • Selectable Debounce Tim.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TCA640 Chrominance Amplifier Philips
TCA62723FMG Three-Channel Constant-Current LED Driver Toshiba
TCA62724FMG Three-Channel Constant-Current LED Driver Toshiba Semiconductor
TCA62735AFLG Charge Pump type DC/DC Converter Toshiba Semiconductor
TCA62746AFG 16-Output Constant Current LED Driver Toshiba Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
TCA6416 Low-Voltage 16-Bit I2C and SMBus I/O Expander
TCA6416A Low-Voltage 16-Bit I2C and SMBus I/O Expander
TCA6408 LOW-VOLTAGE 8-BIT I2C AND SMBus I/O EXPANDER
TCA6408A Low-Voltage 8-Bit I2C and SMBus I/O Expander
TCA6408A-Q1 Low-Voltage 8-Bit I2C and SMBus I/O Expander

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TCA6418E www.ti.com I2C CONTROLLED 18 CHANNEL GPIO EXPANDER Check for Samples: TCA6418E FEATURES 1 • Operating Power-Supply Voltage Range of 1.65 V to 3.6 V • 18 GPIOs Configurable as Inputs or Outputs • ESD Protection Exceeds JESD 22 on NonGPIO Pins – 2000-V Human Body Model (A114-A) – 1000-V Charged Device Model (C101) • Low Standby (Idle) Current Consumption: 3 μA • Supports 1-MHz Fast Mode Plus I2C Bus • Open-Drain Active-Low Interrupt Output, Asserted When Key is Pressed or Key is Released • Selectable Debounce Time of 50 μs • Schmitt-Trigger Action Allows Slow Input Transition and Better Switching Noise Immunity at the SCL and SDA Inputs: Typical Vhys at 1.8 V is 0.18 V • Latch-Up Performance Exceeds 200 mA Per JESD 78, Class II • Very Small Package – WCSP (YFP): 2 mm × 2 mm; 0.