Texas Instruments TCAN6062
The TCAN6062 is a high-speed Controller Area Network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2024 Annex A (CAN XL) specification. The device supports PWM decoding on TXD pin allowing it to operate in SIC mode, FAST TX mode, and FAST RX mode. For SIC mode, the device reduces signal ringing at dominantto-recessive edge and enables higher throughput in complex network topologies.| Part No. | TCAN6062 |
|---|---|
| Datasheet | TCAN6062 Download |
| Manufacturer |  Texas Instruments |
| Description | CAN XL Transceiver |
| Buy | Stock & Price |
FEATURES
● Meets the requirements of ISO 11898-2:2024 Annex A: HS-PMA with SIC mode and FAST mode (CAN XL)● Supports up to 20Mbps signaling rate in FAST mode and up to 8Mbps in SIC mode – FAST TX mode and FAST RX mode allow for CAN XL data signaling – Actively improves the bus signal by reducing ringing effects in complex topologies – Mixed mode network with CAN FD, CAN SIC possible
● VIO level shifting supports 1.71V to 5.5V
● Receiver common mode input voltage: ±12V
● Protection features: – IEC ESD protection on bus pins – Bus fault protection: ±58V – Undervoltage protection on VCC and VIO supply terminals – TXD dominant time-out (TXD DTO) – Thermal shutdown protection (TSD)
● Operating Modes – Normal mode: SIC, FAST TX, FAST RX – Low-power standby mode supporting remote wake-up request
● Passive behavior when unpowered – Bus and logic terminals are high impedance (no load to operating bus or application) – Hot plug capable: power up/down glitch free operation on bus and RXD output...
