Datasheet4U Logo Datasheet4U.com

THS10082 - SIMULTANEOUS SAMPLING ANALOG-TO-DIGITAL CONVERTER

General Description

The THS10082 is a CMOS, low-power, 10-bit, 8 MSPS analog-to-digital converter (ADC).

The speed, resolution, bandwidth, and single-supply operation are suited for applications in radar, imaging, high-speed acquisition, and communications.

Key Features

  • D Simultaneous Sampling of Two Single-Ended Signals or One Differential Signal D Integrated 16-Word FIFO D Signal-to-Noise and Distortion Ratio: 59 dB at fI = 2 MHz D Differential Nonlinearity Error: ±1 LSB D Integral Nonlinearity Error: ±1 LSB D Auto-Scan Mode for Two Inputs D 3-V or 5-V Digital Interface Compatible D Low Power: 216 mW Max D 5-V Analog Single Supply Operation D Internal Voltage References . . . 50 PPM/°C and ±5% Accuracy D Parallel µC/DSP Interface.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
THS102A Hall Sensor Toshiba
THS103A Hall Sensor Toshiba
THS105 Hall Sensor Toshiba
THS117 HIGH STABILITY MOTOR CONTROL DIGITAL TACHOMETER CRANK SHAFT POSITION SENSOR Toshiba Semiconductor
THS118 HIGH STABILITY MOTOR CONTROL. DIGITAL TACHOMETER. CRANK SHAFT POSITION SENSOR. Toshiba Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
THS10064 SIMULTANEOUS SAMPLING ANALOG-TO-DIGITAL CONVERTER
THS1007 SIMULTANEOUS SAMPLING ANALOG-TO-DIGITAL CONVERTER
THS1009 SIMULTANEOUS SAMPLING ANALOG-TO-DIGITAL CONVERTER
THS1030 30-MSPS CMOS ANALOG-TO-DIGITAL CONVERTER
THS1031 30-MSPS CMOS ANALOG-TO-DIGITAL CONVERTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com THS10082 SLAS254B − MAY 2002 − REVISED NOVEMBER 2002 10ĆBIT, TWO ANALOG INPUT, 8ĆMSPS, SIMULTANEOUS SAMPLING ANALOGĆTOĆDIGITAL CONVERTER FEATURES D Simultaneous Sampling of Two Single-Ended Signals or One Differential Signal D Integrated 16-Word FIFO D Signal-to-Noise and Distortion Ratio: 59 dB at fI = 2 MHz D Differential Nonlinearity Error: ±1 LSB D Integral Nonlinearity Error: ±1 LSB D Auto-Scan Mode for Two Inputs D 3-V or 5-V Digital Interface Compatible D Low Power: 216 mW Max D 5-V Analog Single Supply Operation D Internal Voltage References . . .