TLC4501A Datasheet | Texas Instruments

description The TLC4501 and TLC4502 are the highest precision CMOS single supply rail-to-rail operational amplifiers available today. The input offset voltage is 10 µV typical and 40 µV maximum. This exceptional precision, bined with a 4.7-MHz bandwidth, 2.5-V/µs slew rate, and 50-m A output drive, is ideal for multiple applications including: data acquisition systems, measurement equipment, industrial control applications, and portable digital scales. These amplifiers feature self-calibrating circuitry which digitally trims the input offset voltage to less than 40 µV within the first 300 ms of operation. The offset is then digitally stored in an integrated successive approximation register (SAR). Immediately after the data is stored, the calibration circuitry effectively drops out of the signal path, shuts down, and the device functions as a standard operational amplifier. 3 IN+ 2 IN- Offset Control + - Calibration Circuitry 8 VDD D/A 5V Power-On Reset Control Logic SAR A/D Oscillator 1 OUT 4 GND Figure 1. Channel One of the TLC4502 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Lin EPIC and Self-Cal are trademarks of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright  2001, Texas Instruments Incorporated On products pliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. - POST OFFICE BOX 655303 DALLAS, TEXAS 75265 TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS...