TLC59116F Overview
Product Folder Sample & Buy Technical Documents Tools & Software Support & munity TLC59116F SCLS714C – MARCH 2009 – REVISED SEPTEMBER 2015 TLC59116F 16-Channel Fast-Mode Plus I2C Bus LED Driver 1 Features •1 16 LED Drivers (Each Output Programmable at OFF, ON, LED Brightness, and Group Dimming/Blinking Mixed With Individual LED Brightness) • 16 Open-Drain Output Channels • 256-Step (8-Bit) Linear Programmable Brightness Per LED Output Varying...
TLC59116F Key Features
- 1 16 LED Drivers (Each Output Programmable at OFF, ON, LED Brightness, and Group Dimming/Blinking Mixed With Individual
- 16 Open-Drain Output Channels
- 256-Step (8-Bit) Linear Programmable Brightness Per LED Output Varying From Fully OFF (Default) to Maximum Brightness Us
- 256-Step Group Brightness Control Allows General Dimming (Using a 190-Hz PWM Signal From Fully OFF to Maximum Brightness
- 256-Step Group Blinking With Frequency Programmable From 24 Hz to 10.73 s and Duty Cycle from 0% to 99.6%
- Four Hardware Address Pins Allow 14 TLC59116F Devices to be Connected to the Same I2C Bus
- Four Software-Programmable I2C Bus Addresses (One LED Group Call Address and Three LED Sub-Call Addresses) Allow Groups
- Software Reset Feature (SWRST Call) Allows the Device to be Reset Through the I2C Bus
- Up to 14 Possible Hardware Adjustable Individual I2C Bus Addresses Per Device so That Each Device Can be Programmed
- Output State Change Programmable on the Acknowledge or the STOP mand to Update Outputs Byte-by-Byte or All at the Same T