TMS320F280025-Q1 Datasheet | Texas Instruments

Features - TMS320C28x 32-bit DSP core at 100MHz - IEEE 754 Floating-Point Unit (FPU) - Support for Fast Integer Division (FINTDIV) - Trigonometric Math Unit (TMU) - Support for Nonlinear Proportional Integral Derivative (NLPID) control - CRC Engine and Instructions (VCRC) - Ten hardware breakpoints (with ERAD) - On-chip memory - 128KB (64KW) of flash (ECC-protected) - 24KB (12KW) of RAM (ECC or parity-protected) - Dual-zone security - Clock and system control - Two internal zero-pin 10MHz oscillators - Crystal oscillator or external clock input - Windowed watchdog timer module - Missing clock detection circuitry - Dual-clock parator (DCC) - Single 3.3V supply - Internal VREG generation - Brownout reset (BOR) circuit - System peripherals - 6-channel Direct Memory Access (DMA) controller - 43 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins - 16 digital inputs on analog pins - Enhanced Peripheral Interrupt Expansion (e PIE) - Multiple low-power mode (LPM) support - Embedded Real-time Analysis and Diagnostic (ERAD) - Unique Identification (UID) number - munications peripherals - One Power-Management Bus (PMBus) interface - Two Inter-integrated Circuit (I2C) interfaces - One Controller Area Network (CAN) bus port - Two Serial Peripheral Interface (SPI) ports - One UART-patible Serial munication Interface (SCI) - Two UART-patible Local Interconnect Network (LIN)...