TMS320F28377D-EP
Overview
- Dual-Core Architecture - Two TMS320C28x 32-Bit CPUs - 200 MHz - IEEE 754 Single-Precision Floating-Point Unit (FPU) - Trigonometric Math Unit (TMU) - Viterbi/Complex Math Unit (VCU-II)
- Two Programmable Control Law Accelerators (CLAs) - 200 MHz - IEEE 754 Single-Precision Floating-Point Instructions - Executes Code Independently of Main CPU
- On-Chip Memory - 512KB (256KW) or 1MB (512KW) of Flash (ECC-Protected) - 172KB (86KW) or 204KB (102KW) of RAM (ECC-Protected or Parity-Protected) - Dual-Zone Security Supporting Third-Party Development
- Clock and System Control - Two Internal Zero-Pin 10-MHz Oscillators - On-Chip Crystal Oscillator - Windowed Watchdog Timer Module - Missing Clock Detection Circuitry
- 1.2-V Core, 3.3-V I/O Design
- System Peripherals - Two External Memory Interfaces (EMIFs) With ASRAM and SDRAM Support - Dual 6-Channel Direct Memory Access (DMA) Controllers - Up to 169 Individually Programmable, Multiplexed General-Purpose Input/Output (GPIO) Pins With Input Filtering - Expanded Peripheral Interrupt Controller (ePIE) - Multiple Low-Power Mode (LPM) Support With External Wakeup
- Communications Peripherals - USB 2.0 (MAC + PHY) - Support for 12-Pin 3.3 V-Compatible Universal Parallel Port (uPP) Interface - Two Controller Area Network (CAN) Modules (Pin-Bootable) - Three High-Speed (up to 50-MHz) SPI Ports (Pin-Bootable) - Two Multichannel Buffered Serial Ports (McBSPs) - Four Serial Communications Interfaces (SCI/UART) (Pin-Bootable) - Two I2C Interfaces (Pin-Bootable)
- Analog Subsystem - Up to Four Analog-to-Digital Converters (ADCs) - 16-Bit Mode - 1.1 MSPS Each (up to 4.4-MSPS System Throughput) - Differential Inputs - Up to 12 External Chann
