Datasheet4U Logo Datasheet4U.com

TPA2000D4 Datasheet Stereo 2-w Class-d Audio Power Amplifier

Manufacturer: Texas Instruments

Overview: TPA2000D4 STEREO 2ĆW CLASSĆD AUDIO POWER AMPLIFIER WITH STEREO HP AMPLIFIER SLOS337B − DECEMBER 2000 − REVISED NOVEMBER 2005 D Ideal for Notebook PCs and USB-Powered Speakers D 2 W Into 4 Ω From 5-V Supply D Integrated Class-AB Headphone Amplifier D Second-Generation Modulation Technique − Filterless Operation − Improved Efficiency D Low Supply Current . . . 9 mA typ at 5 V D Shutdown Control . . . < 0.

General Description

LINN LINP HPLIN GAIN0 GAIN1 PVDDL LOUTP PGNDL PGNDL LOUTN PVDDL HPLGAIN HPLOUT MODE HPRGAIN HPROUT DAP PACKAGE (TOP VIEW) 1 32 2 31 3 30 4 29 5 28 6 27 7 26 8 25 9 24 10 23 11 22 12 21 13 20 14 19 15 18 16 17 RINN RINP HPRIN BYPASS SHUTDOWN PVDDR ROUTP PGNDR PGNDR ROUTN PVDDR NC VDD COSC ROSC AGND The TPA2000D4 is a 2-W stereo bridge-tied-load NC − No internal connection (BTL) class-D amplifier designed to drive speakers with as low as 4-Ω impedance.

The amplifier uses TI’s second-generation modulation technique, which results in improved efficiency and SNR, and also allows the device to be connected directly to the speaker without the use of the LC output filter commonly associated with class-D amplifiers (this will result in an EMI which must be shielded at the system level).

These

Key Features

  • make the device ideal for use in notebook PCs where high-efficiency is needed to extend battery run-time. For speakers powered off the USB bus, the high-efficiency allows for higher output power levels without tripping the USB’s overcurrent circuitry. The gain of the amplifier is controlled by two input terminals, GAIN1, and GAIN0. This allows the amplifier to be configured for a gain of 6, 12, 18, and 23.5 dB. The differential input terminals are high-impedance CMOS inputs, and can be used a.

TPA2000D4 Distributor