TPD12S016 Datasheet | Texas Instruments

Features - 1 Conforms to HDMI pliance Tests without any External ponents - IEC 61000-4-2 ESD Protection - ±8-k V Contact Discharge - Supports HDMI 1.4 Data Rate - Matches Class D and Class C Pin Mapping - 8-Channel ESD Protection for Four Differential Pairs With Ultra-Low Differential Capacitance Matching (0.05 p F) - On-Chip Load Switch With 55-m A Current Limit at the HDMI 5V_OUT Pin - Auto-direction Sensing I2C Level Shifter with Oneshot Circuit to Drive a Long HDMI Cable (750-p F Load) - Back-drive Protection on HDMI Connector Side Ports - Integrated Pullup and Pulldown Resistors per HDMI Specification - Space Saving 24-Pin RKT Package and 24TSSOP Package 3 Description The TPD12S016 is a single-chip High Definition Multimedia Interface (HDMI) device with autodirection sensing I2C voltage level shift buffers, a load switch, and integrated low capacitance high-speed electrostatic discharge (ESD) transient voltage suppression (TVS) protection diodes. A 55-m A current limited 5-V output (5V_OUT) sources the HDMI power line. The control of 5V_OUT and the hot plug detect (HPD) circuitry is independent of the LS_OE control signal, and is controlled by the CT_HPD pin, which enables the detection scheme (5V_OUT and HPD) to be active before enabling the HDMI link. The SDA, SCL, and CEC lines pull up to VCCA on the A side. On the B side, the CEC_B pin pulls up to an internal 3.3-V supply rail, SCL_B and SDA_B each pull up to the 5-V rail (5V_OUT). The SCL and SDA pins meet the I2C specification and drive up to 750 p F capacitive loads, exceeding the HDMI 1.4 specifications. The HPD_B port has a glitch filter to avoid false detection due to plug bouncing during the HDMI connector insertion. TPD12S016 offers reverse current blocking at the 5V_OUT pin. SCL_B, SDA_B, CEC_B pins also feature reversecurrent blocking when the system is powered off. 2 Applications - Cell Phones - e Book - Portable Media Players - Set-top Box Device Information(1) PART NUMBER PACKAGE BODY SIZE...