Datasheet4U Logo Datasheet4U.com

TPS2511 - USB Dedicated Charging Port Controller

General Description

The TPS2511 device is a USB-dedicated charging port (DCP) controller and current-limiting power switch.

Key Features

  • 1 Supports a USB DCP Shorting D+ Line to D.
  • Line.
  • Supports a USB DCP Applying 2 V on D+ Line and 2.7 V on D.
  • Line (or a USB DCP Applying 2.7 V on D+ Line and 2 V on D.
  • Line).
  • Supports a USB DCP Applying 1.2 V on D+ and D.
  • Lines.
  • Automatically Switch D+ and D.
  • Lines Connections for an Attached Device.
  • Hiccup Mode for Output Short-Circuit Protection.
  • Provides CS Pin for USB Cable Compensation.
  • Pr.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS2534 Dual Channel Thermopile PerkinElmer Optoelectronics
TPS20 high reliable pressure transmitter Konics
TPS232 Thermopile Sensor PerkinElmer Optoelectronics
TPS2398 -48V Hot Swap Controller ON Semiconductor
TPS2399 -48V Hot Swap Controller ON Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
TPS2511-Q1 USB Dedicated Charging Port Controller
TPS2513 USB Dedicated Charging Port Controller
TPS2513A USB Dedicated Charging Port Controller
TPS2513A-Q1 USB Dedicated Charging Port Controller
TPS2514 USB Dedicated Charging Port Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TPS2511 SLUSB18A – JUNE 2012 – REVISED AUGUST 2016 TPS2511 USB Dedicated Charging Port Controller and Current Limiting Power Switch 1 Features •1 Supports a USB DCP Shorting D+ Line to D– Line • Supports a USB DCP Applying 2 V on D+ Line and 2.7 V on D– Line (or a USB DCP Applying 2.7 V on D+ Line and 2 V on D– Line) • Supports a USB DCP Applying 1.2 V on D+ and D– Lines • Automatically Switch D+ and D– Lines Connections for an Attached Device • Hiccup Mode for Output Short-Circuit Protection • Provides CS Pin for USB Cable Compensation • Programmable Current Limit (ILIM_SET Pin) • Accurate ±10% Current Limit at 2.3 A (Typical) • 70-mΩ (Typical) High-Side MOSFET • Compatible With USB 2.0 and 3.