TPS2561-Q1 Datasheet | Texas Instruments

FEATURES - 2 Qualified for Automotive Applications - Two Separate Current Limiting Channels - Meets USB Current-Limiting Requirements - Adjustable Current Limit, 250 m A- 2.8 A (typ) - ± 7.5% Current-Limit Accuracy at 2.8 A - Fast Overcurrent Response - 3.5-μS (typ) - Two 44-mΩ High-Side MOSFETs - Operating Range: 2.5 V to 6.5 V - 2-μA Maximum Standby Supply Current - Built-in Soft-Start - 15 k V or 8 k V System-Level ESD Capable - UL Listed - File No. E169910 - CB and Nemko Certified DESCRIPTION The TPS2561-Q1 is a dual-channel power-distribution switch intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered. These devices offer a programmable current-limit threshold between 250 m A and 2.8 A (typ) per channel through an external resistor. The power-switch rise and fall times are controlled to minimize current surges during turn on or off. Each channel of the TPS2561-Q1 device limits the output current to a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. The FAULTx logic output for each channel independently asserts low during overcurrent and over temperature conditions. TPS2561-Q1 DRC PACKAGE (TOP VIEW) GND 1 IN 2 IN 3 EN1 4 EN2 5 10 FAULT1 9 OUT1 PAD 8 OUT2 7 ILIM 6 FAULT2 ENx = Active Low for the TPS2560 ENx = Active High for the TPS2561-Q1 2.5 V - 6.5 V 0.1 μF OUT1 2x RFAULT 100 kΩ Fault Signal Fault Signal Control Signal OUT2 RILIM ILIM FAULT1 FAULT2 GND EN1 Control...