TPS25810A-Q1 Datasheet | Texas Instruments

Features - 1 Qualified for Automotive Applications - AEC-Q100 Qualified With the Following Results: - Device Temperature Grade T: - 40°C to 105°C Ambient Operating Temperature Range - Device HBM ESD Classification Level 2 - Device CDM ESD Classification Level C4B - USB Type-C Rev. 1.2 pliant DFP Controller - Connector Attach or Detach Detection - STD, 1.5-A, or 3-A Capability Advertisement on CC - Super-Speed Polarity Determination - VBUS Application and Discharge - VCONN Application to Electronically Marked Cable - Audio and Debug Accessory Identification - 0.7-µA (typ) IDDQ When Port Is Unattached - Three Input Supply Options - IN1: USB Charging Supply - IN2: VCONN Supply - AUX: Device Power Supply - Power Wake Supports Low Power in System Hibernate (S4) and OFF (S5) Power States - 34-mΩ (typ) High-Side MOSFET - Fixed 3.4-A ILIM (±7.1%) - Digital Cable pensation, IOUT ≥ 1.95 A - Package: 20-Pin WQFN (3 mm × 4 mm) (1) 2 Applications - Automotive Infotainment Systems - Automotive Back-seat USB Charging 3 Description The TPS25810A-Q1 device is a USB Type-C downstream-facing port (DFP) controller with an integrated 3-A rated USB power switch. The device monitors the Type-C configuration channel (CC) lines to determine when a USB device is attached. If an upstream-facing port (UFP) device is attached, it applies power to VBUS and municate the selectable VBUS current-sourcing capability to the UFP via the pass-through CC line. If the UFP is attached using an electronically marked cable, it also applies VCONN power to the cable CC pin. The TPS25810A-Q1 can identify and report when Type-C audio or debug accessories are attached. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) WQFN (20) 3.00 mm x 4.00 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. (1) CC pins are IEC-61000-4-2 rated Simplified Schematic Bus Power CC Power Auxiliary Power 4.5 V- 6.5 V 4.5 V- 5.5 V 2.9 V- 5.5 V 120...