TPS2592ZL Datasheet | Texas Instruments

Features - 1 4.5-V to 18-V Protection - Integrated 28-mΩ Pass MOSFET - Absolute Maximum Voltage of 20 V - 1-A to 2.1-A Adjustable ILIMIT - Reverse Current Blocking Support - Programmable OUT Slew Rate, UVLO - Built-in Thermal Shutdown - Safe during Single Point Failure Test (UL60950) - Small Foot Print - 10L (3 mm x 3 mm) VSON 2 Applications - HDD and SSD Drives - Set Top Boxes - Servers / AUX Supplies - Fan Control - PCI/PCIe Cards - Adapter Powered Devices 3 Description The TPS2592xx family of e Fuses is a highly integrated circuit protection and power management solution in a tiny package. The devices use few external ponents and provide multiple protection modes. They are a robust defense against overloads, shorts circuits, voltage surges, excessive inrush current, and reverse current. Current limit level can be set with a single external resistor. Applications with particular voltage ramp requirements can set d V/d T pin with a single capacitor to ensure proper output ramp rates. Many systems, such as SSDs, must not allow holdup capacitance energy to dump back through the FET body diode onto a drooping or shorted input bus. The BFET pin is for such systems. An external NFET can be connected “Back to Back (B2B)” with the TPS2592 output and the gate driven by BFET to prevent current flow from load to source. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) TPS2592ZA TPS2592ZL VSON (10) 3.00 mm × 3.00 mm (1) For all available packages, see the orderable addendum at the end of the datasheet. 4 Application Schematic Transient: Output Short Circuit VIN R1 R2 Cd Vd T 28m: EN/UVLO BFET d V/d...