TPS40005 Datasheet | Texas Instruments

TPS40000, TPS40001 TPS40002, TPS40003 TPS40004, TPS40005 SLUS507D - JANUARY 2002 - REVISED NOVEMBER 2005 LOWĆINPUT VOLTAGEĆMODE SYNCHRONOUS BUCK CONTROLLER Features D Operating Input Voltage 2.25 V to 5.5 V D Output Voltage as Low as 0.7 V D 1% Internal 0.7 V Reference D Predictive Gate Drivet N-Channel MOSFET Drivers for Higher Efficiency D Externally Adjustable Soft-Start and Overcurrent Limit D Source-Only Current or Source/Sink Current D Versions for Starting Into VOUT Pre-Bias D 10-Lead MSOP Power Padt Package for Higher Performance D Thermal Shutdown D Internal Boostrap Diode D Fixed-Frequency, Voltage-Mode Control - TPS40000/1/4 300-k Hz - TPS40002/3/5 600-k Hz SIMPLIFIED APPLICATION DIAGRAM APPLICATIONS D Networking Equipment D Tele Equipment D Base Stations D Servers D DSP Power D Power Modules DESCRIPTION The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI’s proprietary Predictive Gate Drivet technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated. VIN TPS40000 1 ILIM BOOT 10 2 FB HDRV 9 3 P 4 SS/SD SW 8 VDD 7 VOUT 5 GND LDRV...