Datasheet4U Logo Datasheet4U.com

TPS40130 - SYNCHRONOUS BUCK CONTROLLER

General Description

The TPS40130 is a two-phase synchronous buck controller that is optimized for low-output voltage, high-output current applications powered from a supply between 3 V and 40 V.

Key Features

  • Two-Phase Interleaved Operation.
  • 3-V to 40-V Power Stage Operation Range.
  • Supports Up to 6-V VOUT With External Divider.
  • Requires VIN5 @ 50 mA, Typical, Depending on External MOSFETs and Switching Frequency.
  • 1-µA Shutdown Current.
  • Programmable Switching Frequency up to 1 MHz/Phase.
  • Current Mode Control with Forced Current Sharing.
  • Better than 1% Internal 0.7-V Reference.
  • Resistive Divider Sets Direct Output Over Vo.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS4100 FOUR CHANNEL BRIDGED OUTPUT POWER STAGE Tripath
TPS4339 Quad Thermopile PerkinElmer Optoelectronics
TPS434 Thermopile Detector PerkinElmer Optoelectronics
TPS-1 Single Chip Interface Solution Renesas
TPS0505 2W 6KVDC Isolated Dual Output DC/DC Converters TOPPOWER

Other Datasheets by Texas Instruments

Part Number Description
TPS40131 SYNCHRONOUS BUCK CONTROLLER
TPS40132 SYNCHRONOUS BUCK CONTROLLER
TPS40100 MIDRANGE INPUT SYNCHRONOUS BUCK CONTROLLER
TPS40101 MIDRANGE INPUT SYNCHRONOUS BUCK CONTROLLER
TPS40120 VRM10.0 COMPLIANT PROGRAMMABLE FEEDBACK DIVIDER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com TPS40130 SLUS602B – JUNE 2004 – REVISED SEPTEMBER 2005 TWO-PHASE, SYNCHRONOUS BUCK CONTROLLER WITH INTEGRATED MOSFET DRIVERS FEATURES • Two-Phase Interleaved Operation • 3-V to 40-V Power Stage Operation Range • Supports Up to 6-V VOUT With External Divider • Requires VIN5 @ 50 mA, Typical, Depending on External MOSFETs and Switching Frequency • 1-µA Shutdown Current • Programmable Switching Frequency up to 1 MHz/Phase • Current Mode Control with Forced Current Sharing • Better than 1% Internal 0.