TPS54610-EP Datasheet | Texas Instruments

Typical Size 6,4 mm X 9,7 mm .ti. SGLS294A - FEBRUARY 2005 - REVISED AUGUST 2007 3 V TO 6 V INPUT, 6 A OUTPUT SYNCHRONOUS BUCK PWM SWITCHER WITH INTEGRATED FETs (SWIFT™) Features - 2 Controlled Baseline - One Assembly/Test Site, One Fabrication Site - Extended Temperature Performance of - 55°C to 125°C - Enhanced Diminishing Manufacturing Sources (DMS) Support - Enhanced Product-Change Notification - Qualification Pedigree (1) - 30 mΩ, 12 A Peak MOSFET Switches for High Efficiency at 6 A Continuous Output Source or Sink Current - Adjustable Output Voltage Down to 0.9 V With 1% Accuracy - Wide PWM Frequency: Fixed 350 k Hz, 550 k Hz or Adjustable 280 k Hz to 700 k Hz - Synchronizable to 700 k Hz - Load Protected by Peak Current Limit and Thermal Shutdown - Integrated Solution Reduces Board Area and ponent Count (1) ponent qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold pound life. Such qualification testing should not be viewed as justifying use of this ponent beyond specified performance and environmental limits. APPLICATIONS - Low-Voltage, High-Density Distributed Power Systems - Point-of-Load Regulation for High Performance DSPs, FPGAs, ASICs, and Microprocessors - Broadband, Networking, and Optical munications Infrastructure - Portable puting/Notebook PCs DESCRIPTION/ORDERING INFORMATION As a member of the SWIFT™ family of dc/dc regulators, the TPS54610 low-input voltage high-output current synchronous buck PWM converter integrates all required active ponents. Included on the substrate with the listed Features are a true, high-performance, voltage error amplifier that enables maximum performance and flexibility in choosing the output filter L and C...