TPS60205 Datasheet | Texas Instruments

features D Regulated 3.3-V Output Voltage With up to 100-m A Output Current From a 1.8-V to 3.6-V Input Voltage D Less Than 5-m V(PP) Output Voltage Ripple Achieved With Push-Pull Topology D Integrated Low-Battery and Power-Good Detector D Switching Frequency Can Be Synchronized to External Clock Signal D Extends Battery Usage With up to 90% Efficiency and 35-µA Quiescent Supply Current D Easy-to-Design, Low Cost, Low EMI Power Supply Since No Inductors Are Used D 0.05-µA Shutdown Current, Battery is Isolated From Load in Shutdown Mode - description D pact Converter Solution in Ultra Small 10-pin MSOP With Only Four External Capacitors Required D Evaluation Module Available (TPS60200EVM-145) applications D Replaces DC/DC Converters With Inductors in Battery Powered Applications Like: - Two Battery Cells to 3.3-V Conversion - MP3 Portable Audio Players - Battery-Powered Microprocessor Systems - Backup-Battery Boost Converters - PDA’s, Organizers, and Cordless Phones - Handheld Instrumentation - Glucose Meters and Other Medical Instruments The TPS6020x step-up, regulated charge pumps generate a 3.3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage. The devices are typically powered by two Alkaline, Ni Cd, or Ni MH battery cells and operate down to a minimum supply voltage of 1.6 V. Continuous output current is a minimum of 100 m A from a 2-V input. Only four external capacitors are needed to build a plete low-ripple dc/dc converter. The push-pull operating mode of two single-ended charge pumps assures the low output voltage ripple, as current is continuously transferred to the output. INPUT 1.6 V to 3.6 V TPS60204 OUTPUT 3.3 V, 100 m A Ci 2.2 µF R1 1 LBI R2 R3 Co 2.2...