TPS61012 Overview
The TPS6101x devices are boost converters intended for systems that are typically operated from a singleor dual-cell nickel-cadmium (NiCd), nickel-metal hydride (NiMH), or alkaline battery. The converter output voltage can be adjusted from 1.5 V to a maximum of 3.3 V, by an external resistor divider or, is fixed internally on the chip. The devices provide an output current of 200 mA with a supply voltage of only 0.9.
TPS61012 Key Features
- 1 Integrated Synchronous Rectifier for Highest Power Conversion Efficiency (> 95%)
- Start-Up Into Full Load With Supply Voltages as Low as 0.9 V, Operating Down to 0.8 V
- 200-mA Output Current From 0.9-V Supply
- Powersave-Mode for Improved Efficiency at Low
- Autodischarge Allows to Discharge Output
- Device Quiescent Current Less Than 50 μA
- Ease-of-Use Through Isolation of Load From
- Integrated Antiringing Switch Across Inductor
- Integrated Low Battery parator
- Micro-Small 10-Pin MSOP or 3 mm x 3 mm QFN