Datasheet4U Logo Datasheet4U.com

TPS61043 Datasheet Constant Current Led Driver

Manufacturer: Texas Instruments

Overview: Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TPS61043 SLVS465C – DECEMBER 2003 – REVISED FEBRUARY 2016 TPS61043 Constant Current LED Driver.

General Description

The TPS61043 is a high-frequency boost converter with constant current output that drives white LEDs or similar.

The LED current is set with the external sense resistor (RS) and is directly regulated by the feedback pin (FB) that regulates the voltage across the sense resistor RS to 252 mV (typical).

To control LED brightness, the LED current can be pulsed by applying a PWM (pulse width modulated) signal with a frequency range of 100 Hz to 50 kHz to the control pin (CTRL).

Key Features

  • 1 Current Source With 18-V Overvoltage Protection.
  • Powers up to 4 LEDs in Series.
  • Input Voltage Range: 1.8 V to 6 V.
  • Internal 30-V Switch.
  • Up to 85% Efficiency.
  • Precise Brightness Control Using PWM Signal or Analog Signal.
  • Switching Frequency up to 1 MHz.
  • Internal Power MOSFET Switch 400 mA.
  • Operates With Small Output Capacitors Down to 100 nF.
  • Disconnects LEDs During Shutdown.
  • No Load Quiescent Cu.

More Datasheets from Texas Instruments

Part Number Description
TPS61040 Low-Power DC-DC Boost Converter
TPS61040-Q1 Low-Power DC-DC Boost Converter
TPS61041 Low-Power DC-DC Boost Converter
TPS61041-Q1 Low-Power DC-DC Boost Converter
TPS61042 Constant Current LED Driver
TPS61045 Digitally Adjustable Boost Converter
TPS61046 28-V Output Voltage Boost Converter
TPS61000 Single- and Dual-Cell Boost Converter
TPS61001 Single- and Dual-Cell Boost Converter
TPS61002 Single- and Dual-Cell Boost Converter

TPS61043 Distributor