TPS650006 Datasheet | Texas Instruments

ures - 1 Step-Down Converters: - VIN Range From 2.3 V to 6 V - Spread Spectrum Clock (SSC) Generation for Reduced EMI - 2.25-MHz Fixed Frequency Operation - 600-m A or 1-A (TPS650061) Output Current - Low Dropouts (LDOs): - VIN Range From 1.6 V to 6 V - Adjustable Output Voltage - Up to 300-m A Output Current - Separate Power Inputs and Enables - Supply Voltage Supervisor (TPS65001) - Manual Reset Input for Push Button - Adjustable Reset Time - Adjustable Reset Voltage - 3-mm × 3-mm 16-Pin WQFN (TPS65000) - 3-mm × 3-mm 20-Pin WQFN (TPS65001) 2 Applications - Points-of-Load - Embedded Processor Power - Cell Phones - Smart Phones - PDAs - Pocket PCs - Portable Media Players 3 Description The TPS6500xx devices are single-chip power management (PWM) ICs for portable applications. Both devices bine a single step-down converter with two low-dropout (LDO) regulators. The stepdown converter enters a low-power mode at light load for maximum efficiency across the widest possible range of load currents. For low-noise applications, the devices can be forced into fixed-frequency PWM through a pin. The step-down converter is small because of its small inductor and capacitors. The step-down converter has power good status output for sequencing. The LDOs can supply 300 m A and operate with an input voltage range from 1.6 V to 6 V. A step-down converter or main battery can power the LDOs directly. The step-down converter and the LDOs have separate voltage inputs that enable maximum design and sequencing flexibility. Device Information(1) PART...