Texas Instruments TPS65200
The TPS65200 device integrates a high-efficiency, USB-friendly switched-mode charger with OTG support for single-cell Li-ion and Li-polymer batteries, D+D- detection, a 50-mA fixed-voltage LDO, a highefficiency WLED boost converter, and high-accuracy current-shunt monitor into a single chip. The TPS65200 comes in a tiny, 2.8-mm × 2.6-mm, 36-pin, 0.4-mm pitch die size ball grid array (DSBGA).| Part No. | TPS65200 |
|---|---|
| Datasheet | TPS65200 Download |
| Manufacturer |  Texas Instruments |
| Description | Li+ Battery Charger |
| Buy | Stock & Price |
FEATURES
●1 Battery Switching Charger, WLED Driver, and Current Shunt Monitor in a Single Package● Battery Charger – Charges Faster Than Linear Chargers – High-Accuracy Voltage and Current Regulation – Input Current Regulation Accuracy: ±5% (100 mA, 500 mA) – Charge Voltage Regulation Accuracy: ±0.5% (25°C) ±1% (0 - 125°C) – Charge Current Regulation Accuracy: ±5% – Bad Adaptor Detection and Rejection – Safety Limit Register for Maximum Charge Voltage and Current Limiting – High-Efficiency Mini-USB/AC Battery Charger for Single-Cell Li-Ion and Li-Polymer Battery Packs – Built-In Input Current Sensing and Limiting – Integrated Power FETs for Up to 1.25-A Charge Rate – Programmable Charge Parameters through I2C Interface (Up to 400 Kbps): – Input Current – Fast-Charge/Termination Current – Charge Voltage (3.5 V - 4.44 V) – Safety Timer – Termination Enable – Synchronous Fixed-Frequency PWM Controller Operating at 3 MHz With 0% to 99.5% Duty Cycle – Safety Timer With Reset Control – Reve...
