TPS75125Q Datasheet | Texas Instruments

URES - 23 1.5-A Low-Dropout Voltage Regulator - Available in 1.5 V, 1.8 V, 2.5 V, and 3.3 V Fixed Output and Adjustable Versions - Open Drain Power-Good (PG) Status Output (TPS751xx Q) - Open Drain Power-On Reset With 100ms Delay (TPS753xx Q) - Dropout Voltage Typically 160 m V at 1.5 A (TPS75133Q) - Ultralow 75-μA Typical Quiescent Current - Fast Transient Response - 2% Tolerance Over Specified Conditions for Fixed-Output Versions - 20-Pin TSSOP Power PAD™ (PWP) Package - Thermal Shutdown Protection APPLICATIONS - Tele - Servers - DSP, FPGA Supplies DESCRIPTION The TPS753xx Q and TPS751xx Q devices are low-dropout regulators with integrated power-on reset and power-good (PG) functions respectively. These devices are capable of supplying 1.5 A of output current with a dropout of 160 m V (TPS75133Q, TPS75333Q). Quiescent current is 75 μA at full load and drops down to 1 μA when the device is disabled. These devices are designed to have fast transient response for larger load current changes. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 160 m V at an output current of 1.5 A for the TPS75x33Q) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 75 μA over the full range of output current, 1 m A to 1.5 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. The device is enabled when EN is connected to a low-level input voltage. This LDO family also Features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 μA at TJ = +25°C. blank blank Typical Application Circuit (Fixed Voltage Options) VIN 0.22 m F 3 IN 4 IN 5 EN PG or...