TPS92602-Q1 Datasheet | Texas Instruments

Features - 1 Qualified for Automotive Applications - AEC-Q100 Qualified With the Following Results: - Device Temperature Grade 1: - 40°C to 125°C Ambient Operating Temperature - Device HBM ESD Classification Level 2 - Device CDM ESD Classification Level C4B - Input Voltage: 4 V- 40 V (45 V Abs. Max.) - Output Voltage: 4 V- 75 V (80 V Abs. Max.) - Fixed-Frequency Current-Mode Controller With Integrated Slope pensation - Two Regulation Loops, Constant-Current Output and Constant-Voltage Output of Each Channel - High-Side Current Sense: - 150-m V or 300-m V Sense Voltage (EEPROM Option) - ±6-m V Offset (Achieving Approx. 4% or 2% LED Current Accuracy) - Output Voltage Sense, Internal Voltage Reference: 2.2 V ±5% - Integrated Low-Side NMOS-FET Driver: Peak Gate-Drive Current Typ. 0.7 A - Frequency Synchronization - Both PWM Dimming and Analog Dimming - Diagnostic: - High-Side Current (LED Current) Available as Analog Output - Open-LED and Short-to-GND Detection - Shorted Output Protection - Internal Under- and Overvoltage Lockout 2 Applications - Automotive Headlight LED Driver - High-Brightness LED Applications 3 Description The TPS9260x-Q1 family of devices is a singlechannel and dual-channel high-side-current LED driver. With full protection and diagnostics, this family of devices is dedicated for and ideally suited to automotive front lighting. The base of each independent driver is a peak-current-mode boost controller. Each controller has two independent feedback loops, a current-feedback loop with a highside current-sensing shunt and a voltage-feedback loop with an external resistor-divider network. The controller delivers a constant output voltage or a constant output current. The connected load determines whether the device regulates a constant output current (if the circuit reaches the current setpoint earlier than voltage set-point) or a constant output voltage (if the circuit reaches the voltage setpoint is reached first, for example, in an open-load...