Datasheet4U Logo Datasheet4U.com

TUSB1310A - USB3.0 Transceiver

General Description

The TUSB1310A device is one port, 5.0-Gbps USB 3.0 physical layer transceiver that operates off of one reference clock, which is provided by either a crystal or an external reference clock.

The reference clock frequencies are selectable from 20, 25, 30, and 40 MHz.

Key Features

  • 1 Universal Serial Bus (USB).
  • Single Port 5.0-Gbps USB 3.0 Physical Layer Transceiver.
  • One 5.0-Gbps SuperSpeed Connection.
  • One 480-Mbps HS/FS/LS Connection.
  • Fully Compliant With USB 3.0 Specification, Revision 1.0.
  • Supports 3+ Meters USB 3.0 Cable Length.
  • Fully Adaptive Equalizer to Optimize Receiver Sensitivity.
  • PIPE to Link-Layer Controller.
  • Supports 16-Bit SDR Mode at 250 MHz.
  • Compliant With PHY Interfac.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TUSD05H4U Ultra Low Capacitance ESD Protection Array KUU

Other Datasheets by Texas Instruments

Part Number Description
TUSB1310 USB3.0 Transceiver
TUSB1002 Dual-Channel Linear Redriver
TUSB1042I 2:1 Linear Redriver Switch
TUSB1044 Multi-Protocol Bi-Directional Linear Redriver
TUSB1046-DCI Linear Redriver Crosspoint Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community TUSB1310A SLLSE32G – NOVEMBER 2010 – REVISED NOVEMBER 2017 TUSB1310A USB 3.0 Transceiver Not Recommended for New Designs 1 Device Overview 1.1 Features •1 Universal Serial Bus (USB) – Single Port 5.0-Gbps USB 3.0 Physical Layer Transceiver – One 5.0-Gbps SuperSpeed Connection – One 480-Mbps HS/FS/LS Connection – Fully Compliant With USB 3.0 Specification, Revision 1.0 – Supports 3+ Meters USB 3.0 Cable Length – Fully Adaptive Equalizer to Optimize Receiver Sensitivity – PIPE to Link-Layer Controller – Supports 16-Bit SDR Mode at 250 MHz – Compliant With PHY Interface for the USB Architectures (PIPE), Version 3.