Datasheet4U Logo Datasheet4U.com

TX7332 - 32-Channel Transmitter

General Description

The TX7332 is a highly integrated, high-performance transmitter solution for ultrasound imaging system.

The device has total 32 pulser circuits (PULS), 32 transmit/receive (T/R) switches, and supports both on-chip and off-chip beamformer (TxBF).

Key Features

  • 1 TX7332 supports:.
  • 32-channel three-level pulser and active transmit/receive (T/R) switch.
  • Very low power on-chip beamforming mode:.
  • In receive-only mode: 0.45 mW/ch.
  • In transmit-receive mode: 16.4 mW/ch.
  • In CW mode: 160 mW/ch.
  • In global power-down mode: 0.1 mW/ch.
  • Three-level pulser:.
  • Maximum output voltage: ±100 V.
  • Minimum output voltage: ±1 V.
  • Maximum output current: 1.2 A to 0.3 A.
  • Ma.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TX7-503C-ST3 STRATUM III SMD TCXO CMOS QUARTZCOM the communications
TX7-705C-C-ST3 STRATUM III SMD TCXO CMOS QUARTZCOM the communications
TX7022H Low Power Voltage Detector ChipSourceTek
TX7024H Low Power Voltage Detector ChipSourceTek
TX7027H Low Power Voltage Detector ChipSourceTek

Other Datasheets by Texas Instruments

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community TX7332 SBOS975 – MARCH 2019 TX7332 Three-Level, 32-Channel Transmitter With 1.2-A Pulser, T/R Switch, and Integrated Transmit Beamformer 1 Features •1 TX7332 supports: – 32-channel three-level pulser and active transmit/receive (T/R) switch – Very low power on-chip beamforming mode: – In receive-only mode: 0.45 mW/ch – In transmit-receive mode: 16.4 mW/ch – In CW mode: 160 mW/ch – In global power-down mode: 0.1 mW/ch • Three-level pulser: – Maximum output voltage: ±100 V – Minimum output voltage: ±1 V – Maximum output current: 1.2 A to 0.3 A – Maximum clamp current: 0.5 A to 0.