Datasheet4U Logo Datasheet4U.com

UCC27200A - High-Side and Low-Side Driver

General Description

The UCC2720xA family of high-frequency N-channel MOSFET drivers include a 120-V bootstrap diode and high-side/low-side driver with independent inputs for maximum control flexibility.

Key Features

  • 1 Drives Two N-Channel MOSFETs in High-Side and Low-Side Configuration.
  • Negative Voltage Handling on HS (.
  • 18V).
  • Maximum Boot Voltage 120 V.
  • Maximum VDD Voltage 20 V.
  • On-Chip 0.65-V VF, 0.6-Ω RD Bootstrap Diode.
  • Greater than 1 MHz of Operation.
  • 20-ns Propagation Delay Times.
  • 3-A Sink, 3-A Source Output Currents.
  • 8-ns Rise/7-ns Fall Time with 1000-pF Load.
  • 1-ns Delay Matching.
  • Undervoltage Lo.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UCC2750 Source Ringer Controller Unitrode
UCC27519DBVR 4A Single-Channel Non-Inverting Gate Driver UMW
UCC2105 CC/CV MODE STEP DOWN SWITCHING REGULATOR UTC
UCC25701 Advanced Voltage Mode Pulse Width Modulator Unitrode
UCC25702 Advanced Voltage Mode Pulse Width Modulator Unitrode

Other Datasheets by Texas Instruments

Part Number Description
UCC27200 High-Side and Low-Side Driver
UCC27201 High-Side and Low-Side Driver
UCC27201A High-Side and Low-Side Driver
UCC27201A-Q1 High-Side and Low-Side Driver
UCC27210 High-Frequency High-Side and Low-Side Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community UCC27200A, UCC27201A SLUSAF9B – FEBRUARY 2011 – REVISED JULY 2015 UCC2720xA 120-V Boot, 3-A Peak, High-Frequency, High-Side and Low-Side Driver 1 Features •1 Drives Two N-Channel MOSFETs in High-Side and Low-Side Configuration • Negative Voltage Handling on HS (–18V) • Maximum Boot Voltage 120 V • Maximum VDD Voltage 20 V • On-Chip 0.65-V VF, 0.