Datasheet4U Logo Datasheet4U.com

XTR300 - Industrial Analog Current/Voltage OUTPUT DRIVER

General Description

The XTR300 is a complete output driver for industrial and process control applications.

The output can be configured as current or voltage by the digital I/V select pin.

No external shunt resistor is required.

Key Features

  • 1.
  • 2 USER-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XTR30010 High Temperature PWM Controllers EASii
XTR30020 High Temperature Buck EASii
XTR101 Precision/ Low Drift 4-20mA TWO-WIRE TRANSMITTER Burr-Brown Corporation
XTR103 4-20mA Current Transmitter Burr-Brown Corporation
XTR104 4-20mA Current Transmitter Burr-Brown Corporation

Other Datasheets by Texas Instruments

Part Number Description
XTR305 Industrial Analog Current or Voltage Output Driver
XTR106 4mA-to-20mA Current Transmitter
XTR110 PRECISION VOLTAGE-TO-CURRENT CONVERTER/TRANSMITTER
XTR111 Precision Voltage-to-Current Converter/Transmitter
XTR115 Current-Loop Transmitters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XTR300 XTR300 www.ti.com SBOS336C – JUNE 2005 – REVISED JUNE 2011 Industrial Analog Current/Voltage OUTPUT DRIVER Check for Samples: XTR300 FEATURES 1 •2 USER-SELECTABLE: Voltage or Current Output • +40V SUPPLY VOLTAGE • VOUT: ±10V (up to ±17.5V at ±20V supply) • IOUT: ±20mA (linear up to ±24mA) • SHORT- OR OPEN-CIRCUIT FAULT INDICATOR PIN • NO CURRENT SHUNT REQUIRED • OUTPUT DISABLE FOR SINGLE INPUT MODE • THERMAL PROTECTION • OVERCURRENT PROTECTION • SEPARATE DRIVER AND RECEIVER CHANNELS • DESIGNED FOR TESTABILITY CC Input Signal (Optional) ROS VREF XTR300 V+ V- IMON Current Copy RIMON 1kW VIN SET ICOPY IDRV OPA DRV RSET GND1 RIA 1kW GND3 IIA IAOUT OD M1 Digital M2 Control IAIN+ RG1 IA RG2 IAIN- Error Flags EFCM EFLD EFOT DGND RGAIN Load GND2 Figure 1.