bq2083-V1P3 Datasheet | Texas Instruments

.ti. SBSĆPLIANT GAS GAUGE IC FOR USE WITH THE bq29311 bq2083-V1P3 SLVS508 - OCTOBER 2003 Features D Provides Accurate Measurement of Available Charge in Li-Ion and Li-Polymer Batteries D Supports the Smart Battery Specification (SBS) V1.1 D Works With the TI bq29311 Analog Front End (AFE) Protection IC to Provide plete Pack Electronics for 10.8-V or 14.4-V Battery Packs With Few External ponents D Based on a Powerful Low-Power RISC CPU Core With High-Performance Peripherals D Integrated Flash Memory Eliminates the Need for External Configuration EEPROM D Measures Charge Flow Using a High Resolution 16-Bit Integrating Converter - Better Than 3-n Vh of Resolution - Self-Calibrating - Offset Error Less Than 1-µV D Uses 16-Bit Delta Sigma Converter for Accurate Voltage and Temperature Measurements D Programmable Cell Modeling for Maximum Battery Fuel Gauge Accuracy BLOCK DIAGRAM D Drives 3-, 4-, or 5-Segment LED Display for Remaining Capacity Indication D 38-Pin TSSOP (DBT) APPLICATIONS D Notebook PCs D Medical and Test Equipment D Portable Instrumentation DESCRIPTION The bq2083- V1P3 SBS-pliant gas gauge IC for battery pack or in-system installation maintains an accurate record of available charge in Li-ion or Li-polymer batteries. The bq2083- V1P3 monitors capacity and other critical parameters of the battery pack and reports the information to the system host controller over a serial munication bus. It is designed to work with the bq29311 analog front-end (AFE) protection IC to maximize functionality and safety and minimize ponent count and cost in smart battery circuits. Using information from the bq2083- V1P3, the host controller can manage remaining battery power to extend the system run time as much as...