bq24702 Datasheet | Texas Instruments

.ti. Actual Size (6,60 mm x 7,90 mm) bq24702 bq24703 SLUS553E - MAY 2003 - REVISED OCTOBER 2007 MULTICHEMISTRY BATTERY CHARGER CONTROLLER AND SYSTEM POWER SELECTOR Features 1 - Dynamic Power Management, DPM Minimizes Battery Charge Time - Integrated Selector Supports Battery Conditioning and Smart Battery Learn Cycle - Zero Volt Operation - Selector Feedback Circuit Ensures Break-Before-Make Transition - ±0.4% Charge Voltage Accuracy, Suitable for Charging Li-Ion Cells - ±4% Charge Current Accuracy - 300-kHz Integrated PWM Controller for High-Efficiency Buck Regulation - Depleted Battery Detection and Indication to Protect Battery From Over Discharge - 20-μA Sleep Mode Current for Low Battery Drain - 24-Pin TSSOP Package and 5 mm × 5 mm QFN package (bq24703 only) DESCRIPTION The bq24702/bq24703 is a highly integrated battery charge controller and selector tailored for notebook and sub-notebook PC applications. The bq24702/bq24703 uses dynamic power management (DPM) to minimize battery charge time by maximizing use of available wall-adapter power. This is achieved by dynamically adjusting the battery charge current based on the total system (adapter) current. The bq24702/bq24703 uses a fixed frequency, pulse width modulator (PWM) to accurately control battery charge current and voltage. Charge current limits can be programmed from a keyboard controller DAC or by external resistor dividers from the precision 5-V, ±0.6%, externally bypassed voltage reference (VREF), supplied by the bq24702/bq24703. 1 BATDEP 2 SRSET 3 ACSET 4 VREF 5 ENABLE 6 BATSET 7 P bq24702, bq24703 PW PACKAGE (TOP VIEW) bq24703 RHD PACKAGE (BOTTOM VIEW) ACDET ACPRES ACSEL BATDEP SRSET ACSET VREF ENABLE BATSET...