Datasheet4U Logo Datasheet4U.com

bq76200 - high-voltage battery pack front-end charge/discharge high-side NFET driver

General Description

The bq76200 device is a low-power, high-side, Nchannel system.

A high-side protection avoids ground disconnection in the system and also allows continuous communication between the battery pack and host system.

Key Features

  • 1 CHG and DSG high-side NMOS FET drivers for battery protection fast FET turn-on and turn-off times.
  • Pre-charge PFET driver (for current-limited precharge of significantly depleted cell-pack).
  • Independent digital enable control for charging and discharging.
  • Minimal external components needed.
  • Scalable external capacitor-based charge pump to accommodate a different range of FETs in parallel.
  • High-voltage tolerant (100-V absolute maximum).

📥 Download Datasheet

Datasheet Details

Part number bq76200
Manufacturer Texas Instruments
File Size 1.83 MB
Description high-voltage battery pack front-end charge/discharge high-side NFET driver
Datasheet download datasheet bq76200 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by Texas Instruments

Part Number Description
bq76920 3-series to 15-series cell battery monitor
bq76925 Host-Controlled Analog Front End
bq76930 3-series to 15-series cell battery monitor
bq76940 3-series to 15-series cell battery monitor
BQ76PL102 Dual-Cell Li-Ion Battery Monitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community bq76200 SLUSC16B – NOVEMBER 2015 – REVISED MARCH 2019 bq76200 high-voltage battery pack front-end charge/discharge high-side NFET driver 1 Features •1 CHG and DSG high-side NMOS FET drivers for battery protection fast FET turn-on and turn-off times • Pre-charge PFET driver (for current-limited precharge of significantly depleted cell-pack) • Independent digital enable control for charging and discharging • Minimal external components needed • Scalable external capacitor-based charge pump to accommodate a different range of FETs in parallel • High-voltage tolerant (100-V absolute maximum) • Internal switch to enable pack-voltage sensing • Common and separate charge and discharge path configuration suppor