Datasheet4U Logo Datasheet4U.com

iP7302 - TRANSITION-MODE SINGLE STAGE PFC LED POWER SUPPLY

Datasheet Summary

Description

2.

Features

  • The iP7302 operates on fly-back circuit after rectifier diode, so the waveform of input current follows that of input voltage. It is a peak current mode fly-back PFC controller, with valley turn-on /Quasi Resonant mode (QR), so very high efficiency is easily achieved. iP7302 is different from iP7300 in the connections of inputs of error amplifier between pin1 and pin2. The Pin1 is connected to positive input and pull up 50KΩ resistor to internal supply of 5V. The negative input is connected to.

📥 Download Datasheet

Datasheet preview – iP7302

Datasheet Details

Part number iP7302
Manufacturer inergy
File Size 139.96 KB
Description TRANSITION-MODE SINGLE STAGE PFC LED POWER SUPPLY
Datasheet download datasheet iP7302 Datasheet
Additional preview pages of the iP7302 datasheet.

📁 Similar Datasheet

  • IP7800 - 1 AMP POSITIVE VOLTAGE REGULATOR (Seme LAB)
  • IP7800A - 1 AMP POSITIVE VOLTAGE REGULATOR (Seme LAB)
  • IP7805A - 1 AMP POSITIVE VOLTAGE REGULATOR (Seme LAB)
  • IP7812 - 1 AMP POSITIVE VOLTAGE REGULATOR (Seme LAB)
  • IP7812A - 1 AMP POSITIVE VOLTAGE REGULATOR (Seme LAB)
  • IP78M00 - 0.5 AMP POSITIVE VOLTAGE REGULATOR (Seme LAB)
  • IP78M00-LCC4 - 0.5 AMP POSITIVE VOLTAGE REGULATOR IN A CERAMIC SURFACE MOUNT PACKAGE (Seme LAB)
  • IP78M00A - 0.5 AMP POSITIVE VOLTAGE REGULATOR (Seme LAB)
  • IP78M00A-LCC4 - 0.5 AMP POSITIVE VOLTAGE REGULATOR IN A CERAMIC SURFACE MOUNT PACKAGE (Seme LAB)
  • IP78M05-LCC4 - 0.5 AMP POSITIVE VOLTAGE REGULATOR IN A CERAMIC SURFACE MOUNT PACKAGE (Seme LAB)
Other Datasheets by inergy
  • iP7300 - Power factor correction control chip

Full PDF Text Transcription

Click to expand full text
iP7302 TRANSITION-MODE SINGLE STAGE PFC LED POWER SUPPLY 1. Description 2. Features The iP7302 operates on fly-back circuit after rectifier diode, so the waveform of input current follows that of input voltage. It is a peak current mode fly-back PFC controller, with valley turn-on /Quasi Resonant mode (QR), so very high efficiency is easily achieved. iP7302 is different from iP7300 in the connections of inputs of error amplifier between pin1 and pin2. The Pin1 is connected to positive input and pull up 50KΩ resistor to internal supply of 5V. The negative input is connected to output to form unity gain buffer. Pin2 is non connected. This modification is specially made to suit single stage LED power supply which requires PFC.
Published: |