Datasheet4U Logo Datasheet4U.com

LN9310 - Tiny Package Low Dropout Current Source

General Description

The LN9310 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs.

The LN9310 uses a internal resistor to set the bias current for six LEDs, which are matched to 3%.

Key Features

  • a low 60mV dropout at 20mA.
  • 3% High accuracy current matching.
  • 20mA full scale current.
  • PWM brightness control.
  • 2.5V to 5.5V supply voltage range.
  • Thermal shutdown protection.
  • Under-voltage protection.
  • Package.
  • DFN3×3-10.
  • QFN3×3-16 Function Denotes Package Type: DFN3×3-10 Denotes Package Type: QFN3×3-16 Embossed Tape :Standard Feed Embossed Tape :Reverse Feed Normal package Pb Free package Green package Rev.1.0.
  • June.14, 2011 1 www. natline.

📥 Download Datasheet

Datasheet Details

Part number LN9310
Manufacturer natlinear
File Size 267.70 KB
Description Tiny Package Low Dropout Current Source
Datasheet download datasheet LN9310 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LN9014 Low Level and General Purpose Amplifiers Micro Electronics
LN963185UNA-B4 LED LINE LIGHT SOURCE Panasonic Semiconductor
LN9926L 20V Dual N-Channel Enhancement-Mode MOSFET LRC
LN9926LT1G Dual N-Channel Enhancement-Mode MOSFET LRC
LN9T08A High performance AC / DC switching power supply controller ICs Lii Semiconductor

Other Datasheets by natlinear

Part Number Description
LN9300 Tiny Package Low Dropout Current Source
LN9305 5 Channel Low Dropout Current Source
LN9306 Tiny Package Low Dropout Current Source
LN9358 Constant-Current White LED Bias
LN9364 80mA 4-Channel Charge Pump White LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Tiny Package Low Dropout Current Source LN9310 ■ General Description The LN9310 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. The LN9310 uses a internal resistor to set the bias current for six LEDs, which are matched to 3%. The LN9310's advantages over ballast resistors include much lower bias variation with supply voltage variation, significantly lower dropout voltage, and in some applications, significantly improved efficiency. The LN9310 requires a 60mV dropout at a 20mA load on each output to match the LED brightness. The LN9310 is suitable for single cell Li-ion battery power device that using low forward voltage white LEDs.