Datasheet4U Logo Datasheet4U.com

74ALVC125-Q100 - Quad buffer/line driver

General Description

The 74ALVC125-Q100 is a quad non-inverting buffer/line driver with 3-state outputs.

The 3-state outputs (nY) are controlled by the output enable input (nOE).

A HIGH on the nOE pin causes the outputs to assume a high-impedance OFF-state.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 3).
  • Specified from -40 °C to +85 °C.
  • Wide supply voltage range from 1.65 V to 3.6 V.
  • 3.6 V tolerant inputs/outputs.
  • CMOS low power consumption.
  • Direct interface with TTL levels (2.7 V to 3.6 V).
  • Power-down mode.
  • Latch-up performance exceeds 250 mA.
  • Complies with JEDEC standards:.
  • JESD8-7 (1.65 V to 1.95 V).
  • JESD8-5 (2.3 V to 2.7 V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74ALVC125 Quad buffer/line driver NXP
74ALVC132 Low Voltage Quad 2-Input NAND Gate Fairchild Semiconductor
74ALVC162240 Low Voltage 16-Bit Inverting Buffer/Line Driver Fairchild Semiconductor
74ALVC162244 Low Voltage 16-Bit Buffer/Line Driver Fairchild Semiconductor
74ALVC162244 Low-Voltage 16-Bit Buffer/Line Driver ON Semiconductor

Other Datasheets by Nexperia

Part Number Description
74ALVC125 Quad buffer/line driver
74ALVC14 Hex inverting Schmitt trigger
74ALVC14PW Hex inverting Schmitt trigger
74ALVC162334A 16-bit registered driver
74ALVC162334ADGG 16-bit registered driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74ALVC125-Q100 Quad buffer/line driver; 3-state Rev. 4 — 30 April 2021 Product data sheet 1. General description The 74ALVC125-Q100 is a quad non-inverting buffer/line driver with 3-state outputs. The 3-state outputs (nY) are controlled by the output enable input (nOE). A HIGH on the nOE pin causes the outputs to assume a high-impedance OFF-state. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 3) and is suitable for use in automotive applications. 2. Features and benefits • Automotive product qualification in accordance with AEC-Q100 (Grade 3) • Specified from -40 °C to +85 °C • Wide supply voltage range from 1.65 V to 3.6 V • 3.6 V tolerant inputs/outputs • CMOS low power consumption • Direct interface with TTL levels (2.7 V to 3.