Datasheet4U Logo Datasheet4U.com

74ALVC541-Q100 - Octal buffer/line driver

General Description

The 74ALVC541-Q100 is an octal non-inverting buffer/line drivers with 3-state bus compatible outputs.

The 3-state outputs are controlled by the output enable inputs OE0 and OE1.

A HIGH on OEn causes the outputs to assume a high-impedance OFF-state.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 3).
  • Specified from -40 °C to +85 °C.
  • Wide supply voltage range from 1.65 V to 3.6 V.
  • Complies with JEDEC standard:.
  • JESD8-7 (1.65 V to 1.95 V ).
  • JESD8-5 (2.3 V to 2.5 V).
  • JESD8B (2.7 V to 3.6 V).
  • 3.6 V tolerant inputs/outputs.
  • CMOS LOW power consumption.
  • Direct interface with TTL levels (2.7 V to 3.6 V).
  • Power-down mode.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74ALVC541 Octal buffer / line driver NXP
74ALVC574 Octal D-type flip-flop NXP
74ALVC00 Low Voltage Quad 2-Input NAND Gate Fairchild Semiconductor
74ALVC00 Low Voltage Quad 2-Input NAND Gate ON Semiconductor
74ALVC02 Quad 2-input NOR gate NXP

Other Datasheets by Nexperia

Part Number Description
74ALVC541 Octal buffer/line driver
74ALVC573 Octal D-type transparent latch
74ALVC574 Octal D-type flip-flop
74ALVC00 Quad 2-input NAND gate
74ALVC00-Q100 Quad 2-input NAND gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74ALVC541-Q100 Octal buffer/line driver; 3-state Rev. 3 — 30 April 2021 Product data sheet 1. General description The 74ALVC541-Q100 is an octal non-inverting buffer/line drivers with 3-state bus compatible outputs. The 3-state outputs are controlled by the output enable inputs OE0 and OE1. A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 3) and is suitable for use in automotive applications. 2. Features and benefits • Automotive product qualification in accordance with AEC-Q100 (Grade 3) • Specified from -40 °C to +85 °C • Wide supply voltage range from 1.65 V to 3.6 V • Complies with JEDEC standard: • JESD8-7 (1.65 V to 1.95 V ) • JESD8-5 (2.3 V to 2.5 V) • JESD8B (2.