74ALVCH16543 Overview
The 74ALVCH16543 is a dual octal registered transceiver. Each section contains two sets of D-type latches for temporary storage of the data flow in either direction. Separate latch enable (nLEAB, nLEBA) and output enable (nOEAB, nOEBA) inputs are provided for each register to permit independent control in either direction of the data flow.
74ALVCH16543 Key Features
- CMOS low power consumption
- Direct interface with TTL levels
- MULTIBYTE flow-through standard pin-out architecture
- Back-to-back registers for storage
- Output drive capability 50 Ω transmission lines at 85 °C
- All data inputs have bushold
- Low inductance multiple VCC and GND pins for minimize noise and ground bounce
- Current drive ±24 mA at VCC = 3.0 V
- 3-state non-inverting outputs for bus oriented
74ALVCH16543 Applications
- plies with JEDEC standards
- JESD8-5 (2.3 V to 2.7 V)
- JESD8B/JESD36 (2.7 V to 3.6 V)
