Datasheet4U Logo Datasheet4U.com

74AUP1Z125 - Low-power X-tal driver

General Description

The 74AUP1Z125 is a crystal driver with enable, internal resistor and 3-state output.

When not in use the EN input can be driven HIGH, putting the device in a low power disable mode with X1 pulled HIGH via RPU, X2 set LOW and Y in the high impedance OFF-state.

Key Features

  • Wide supply voltage range from 0.8 V to 3.6 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Complies with JEDEC standards:.
  • JESD8-12 (0.8 V to 1.3 V).
  • JESD8-11 (0.9 V to 1.65 V).
  • JESD8-7 (1.65 V to 1.95 V).
  • JESD8-5 (2.3 V to 2.7 V).
  • JESD8C (2.7 V to 3.6 V).
  • ESD protection:.
  • HBM JESD22-A114F Class 3A exceeds 5000 V.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM JESD22-C101E exceeds 1000.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74AUP1G00 Low-power 2-input NAND gate NXP Semiconductors
74AUP1G00 SINGLE 2 INPUT POSITIVE NAND GATE Diodes
74AUP1G02 Low-power 2-input NOR gate NXP
74AUP1G02 SINGLE 2 INPUT POSITIVE NOR GATE Diodes
74AUP1G04 Low-power inverter NXP Semiconductors

Other Datasheets by Nexperia

Part Number Description
74AUP1Z04 Low-power X-tal driver
74AUP1G00 Low-power 2-input NAND gate
74AUP1G00-Q100 Low-power 2-input NAND gate
74AUP1G02 Low-power 2-input NOR gate
74AUP1G02-Q100 Low-power 2-input NOR gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74AUP1Z125 Low-power X-tal driver with enable and internal resistor; 3-state Rev. 7 — 28 January 2022 Product data sheet 1. General description The 74AUP1Z125 is a crystal driver with enable, internal resistor and 3-state output. When not in use the EN input can be driven HIGH, putting the device in a low power disable mode with X1 pulled HIGH via RPU, X2 set LOW and Y in the high impedance OFF-state. In disable mode the output Y assumes the high impedance OFF-state. Schmitt trigger action on the EN input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. 2. Features and benefits • Wide supply voltage range from 0.8 V to 3.