Datasheet4U Logo Datasheet4U.com

74CBTLV3125-Q100 - 4-bit bus switch

General Description

The 74CBTLV3125-Q100 provides a 4-bit high-speed bus switch with separate output enable inputs (1OE to 4OE).

The low on-state resistance of the switch allows connections to be made with minimal propagation delay.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Supply voltage range from 2.3 V to 3.6 V.
  • High noise immunity.
  • Complies with JEDEC standard:.
  • JESD8-5 (2.3 V to 2.7 V).
  • JESD8-B/JESD36 (2.7 V to 3.6 V).
  • ESD protection:.
  • MIL-STD-883, method 3015 exceeds 2000 V.
  • HBM JESD22-A114F: exceeds 2000 V.
  • CDM AEC-Q100-011 revisi.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74CBTLV3125 4-bit bus switch NXP
74CBTLV3126 4-bit Bus Switch NXP
74CBTLV3244 LOW-VOLTAGE OCTAL BUS SWITCH Renesas
74CBTLV3244 LOW-VOLTAGE OCTAL BUS SWITCH IDT
74CBTLV3245 8-bit bus NXP

Other Datasheets by Nexperia

Part Number Description
74CBTLV3125 4-bit bus switch
74CBTLV3126 4-bit bus switch
74CBTLV3126-Q100 4-bit bus switch
74CBTLV3244 8-bit bus switch
74CBTLV3245 8-bit bus switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74CBTLV3125-Q100 4-bit bus switch Rev. 4 — 23 September 2020 Product data sheet 1. General description The 74CBTLV3125-Q100 provides a 4-bit high-speed bus switch with separate output enable inputs (1OE to 4OE). The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The switch is disabled (high-impedance OFF-state) when the output enable (nOE) input is HIGH. To ensure the high-impedance OFF-state during power-up or power-down, nOE should be tied to the VCC through a pull-up resistor. The minimum value of the resistor is determined by the current-sinking capability of the driver. Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 2.3 V to 3.6 V.