Datasheet4U Logo Datasheet4U.com

74HC123-Q100 - Dual retriggerable monostable multivibrator

Datasheet Summary

Description

The 74HC123-Q100; 74HCT123-Q100 is a dual retriggerable monostable multivibrator with reset.

The basic output pulse width is programmed by selection of external components (REXT and CEXT).

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 V to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).
  • Input levels:.
  • For 74HC1.

📥 Download Datasheet

Datasheet preview – 74HC123-Q100

Datasheet Details

Part number 74HC123-Q100
Manufacturer nexperia
File Size 310.33 KB
Description Dual retriggerable monostable multivibrator
Datasheet download datasheet 74HC123-Q100 Datasheet
Additional preview pages of the 74HC123-Q100 datasheet.

📁 Similar Datasheet

  • 74HC123-Q100 - Dual retriggerable monostable multivibrator (NXP)
  • 74HC123 - High-Speed CMOS Logic Dual Retriggerable Monostable Multivibrators (Texas Instruments)
  • 74HC123 - Dual retriggerable monostable multivibrator (Philips)
  • 74HC123 - Dual retriggerable monostable multivibrator (NXP)
  • 74HC123D - Dual Monostable Multivibrator (Toshiba)
  • 74HC125 - Quadruple Buffers (Texas Instruments)
  • 74HC125 - QUADRUPLE 3-STATE BUFFERS (Diodes)
  • 74HC125 - Quad buffer/line driver (NXP)
  • 74HC125D - Quad Bus Buffer (Toshiba)
  • 74HC125S14 - QUADRUPLE 3-STATE BUFFERS (Diodes)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC123-Q100; 74HCT123-Q100 Dual retriggerable monostable multivibrator with reset Rev. 3.1 — 3 September 2020 Product data sheet 1. General description The 74HC123-Q100; 74HCT123-Q100 is a dual retriggerable monostable multivibrator with reset. The basic output pulse width is programmed by selection of external components (REXT and CEXT). Once triggered this basic pulse width may be extended by retriggering either of the edge triggered inputs (nA or nB). By repeating this process, the output pulse period (nQ = HIGH, nQ = LOW) can be made as long as desired. Alternatively, an output delay can be terminated at any time by a LOW-going edge on input nRD. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Published: |