Datasheet4U Logo Datasheet4U.com

74HC240-Q100 - Octal buffer/line driver

General Description

The 74HC240-Q100; 74HCT240-Q100 is a high-speed Si-gate CMOS device and is pin compatible with Low-Power Schottky TTL (LSTTL).

The 74HC240-Q100; 74HCT240-Q100 is a dual octal inverting buffer/line driver with 3-state outputs.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 V to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).
  • Inverting 3-state outputs.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC240 Octal buffer/line driver Philips
74HC240 High-Speed CMOS Logic Octal Buffer/Line Drivers Texas Instruments
74HC240D Octal Bus Buffer Toshiba
74HC241 HC241/244 NON INVERTED OCTAL BUS BUFFER STMicroelectronics
74HC241 High-Speed CMOS Logic Octal Buffer/Line Drivers Texas Instruments

Other Datasheets by Nexperia

Part Number Description
74HC240 Octal buffer/line driver
74HC240D Octal buffer/line driver
74HC241 Octal buffer/line driver
74HC241D Octal buffer/line driver
74HC244 Octal buffer/line driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC240-Q100; 74HCT240-Q100 Octal buffer/line driver; 3-state; inverting Rev. 2 — 15 July 2020 Product data sheet 1. General description The 74HC240-Q100; 74HCT240-Q100 is a high-speed Si-gate CMOS device and is pin compatible with Low-Power Schottky TTL (LSTTL). The 74HC240-Q100; 74HCT240-Q100 is a dual octal inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high impedance OFF-state. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.