74HC240 Datasheet | Nexperia

description The 74HC240; 74HCT240 is an 8-bit inverting buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on n OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits - Wide supply voltage range from 2.0 V to 6.0 V - CMOS low power dissipation - High noise immunity - Latch-up performance exceeds 100 m A per JESD 78 Class II Level B - plies with JEDEC standards: - JESD8C (2.7 V to 3.6 V) - JESD7A (2.0 V to 6.0 V) - Input levels: - For 74HC240: CMOS level - For 74HCT240: TTL level - Inverting 3-state outputs - ESD protection: - - HBM JESD22-A114F exceeds 2000 V - MM JESD22-A115-A exceeds 200 V - Multiple package options - Specified from -40 °C to +85 °C and from -40 °C to +125 °C 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name 74HC240D -40 °C to +125 °C SO20 74HCT240D 74HC240PW -40 °C to +125 °C TSSOP20 74HCT240PW 74HC240BQ -40 °C to +125 °C DHVQFN20 74HCT240BQ Description plastic small outline package; 20 leads; body width 7.5 mm plastic thin shrink small outline package; 20 leads; body width 4.4 mm plastic dual in-line patible thermal enhanced very thin quad flat package; no leads; 20 terminals; body 2.5 × 4.5 × 0.85 mm Version SOT163-1 SOT360-1 SOT764-1 Nexperia 4. Functional diagram 74HC240; 74HCT240 Octal buffer/line driver; 3-state; inverting 2 1A0 17 2A0 4 1A1 15...