74HC4852 Datasheet PDF - nexperia Dual 4-channel analog multiplexer/demultiplexer Specs

74HC4852 - Dual 4-channel analog multiplexer/demultiplexer

Datasheet Summary

Description

The 74HC4852; 74HCT4852 are dual single-pole quad-throw analog switches (SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications.

Features

four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 & S1) are common to both switches. When E is HIGH, the switches are turned off. The device features injection-current effect control. This allows signals at disabled analog input channels to exceed the supply voltage without affecting the signal of the enabled analog channel, eliminating the need for external diode/resistor networks typically used t.

Datasheet Details

Part number	74HC4852
Manufacturer	nexperia
File Size	292.17 KB
Description	Dual 4-channel analog multiplexer/demultiplexer
Datasheet	74HC4852 Datasheet
Additional preview pages of the 74HC4852 datasheet.

📁 Similar Datasheet

74HC4852 - Dual 4-channel analog multiplexer/demultiplexer (NXP Semiconductors)

74HC4851 - Single 8-channel analog MUX/DEMUX (STMicroelectronics)

74HC4002 - Dual 4-input NOR gate (NXP)

74HC4002-Q100 - Dual 4-input NOR gate (NXP)

74HC4002D-Q100 - Dual 4-input NOR gate (NXP)

74HC4002PW-Q100 - Dual 4-input NOR gate (NXP)

74HC40102 - 8-bit synchronous BCD down counter (Philips)

74HC40103 - 8-bit synchronous binary down counter (NXP)

74HC40104 - 4-bit bidirectional universal shift register (Philips)

74HC40105 - 4-bit x 16-word FIFO register (NXP)

Full PDF Text Transcription

Click to expand full text

74HC4852; 74HCT4852 Dual 4-channel analog multiplexer/demultiplexer with injection-current effect control Rev. 4 — 28 April 2020 Product data sheet 1. General description The 74HC4852; 74HCT4852 are dual single-pole quad-throw analog switches (SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 & S1) are common to both switches. When E is HIGH, the switches are turned off. The device features injection-current effect control.

Published: Jul 25, 2019 |