Datasheet4U Logo Datasheet4U.com

74HCS05 - Hex inverter

General Description

The 74HCS05 is a hex inverter.

The inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Key Features

  • Wide supply voltage range from 2.0 V to 6.0 V.
  • Schmitt-trigger inputs.
  • Low power consumption.
  • Typical supply current (ICC) of 100 nA.
  • Typical input leakage current (II) of ±10 nA.
  • ±7.8 mA output drive at 6 V.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD7A (2.0 V to 6.0 V).
  • ESD protection:.
  • HBM ANSI/ESDA/JEDEC JS-001 class 3A exceeds 4000 V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC00 QUADRUPLE 2-INPUT NAND GATES Diodes
74HC00 Quad 2-input NAND gate NXP
74HC00D Quad 2-Input NAND Gate Toshiba
74HC00S14 QUADRUPLE 2-INPUT NAND GATES Diodes
74HC00T14 QUADRUPLE 2-INPUT NAND GATES Diodes

Other Datasheets by Nexperia

Part Number Description
74HCS02 Quad 2-input NOR gate
74HCS126 Quad buffer/line driver
74HCS165 8-bit parallel-in/serial out shift register
74HCS16507-Q100 8-bit parallel-load shift register
74HC00 Quad 2-input NAND gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HCS05 Hex inverter with Schmitt-trigger inputs and open-drain outputs Rev. 1 — 23 July 2025 Product data sheet 1. General description The 74HCS05 is a hex inverter. The inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. All inputs are Schmitt-trigger inputs, capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. 2. Features and benefits • Wide supply voltage range from 2.0 V to 6.0 V • Schmitt-trigger inputs • Low power consumption • Typical supply current (ICC) of 100 nA • Typical input leakage current (II) of ±10 nA • ±7.8 mA output drive at 6 V • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B • Complies with JEDEC standards: • JESD7A (2.