74HCT1G66-Q100 Datasheet PDF - nexperia Single-pole single-throw analog switch Specs

74HCT1G66-Q100 - Single-pole single-throw analog switch

This page provides the datasheet information for the 74HCT1G66-Q100, a member of the 74HC1G66-Q100 Single-pole single-throw analog switch family.

Datasheet Summary

Description

The 74HC1G66-Q100; 74HCT1G66-Q100 is a single-pole, single-throw analog switch with two input/output terminals (nY and nZ) and a digital enable input (nE).

When nE is LOW, the analog switch is turned off.

Inputs include clamp diodes.

Features

Automotive product qualification in accordance with AEC-Q100 (Grade 1).
Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
Wide supply voltage range from 2.0 V to 10.0 V.
Very low ON resistance:.
45 Ω (typ. ) at VCC = 4.5 V.
30 Ω (typ. ) at VCC = 6.0 V.
25 Ω (typ. ) at VCC = 9.0 V.
High noise immunity.
CMOS low power dissipation.
Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.

Datasheet Details

Part number	74HCT1G66-Q100
Manufacturer	nexperia
File Size	263.19 KB
Description	Single-pole single-throw analog switch
Datasheet	74HCT1G66-Q100 Datasheet
Additional preview pages of the 74HCT1G66-Q100 datasheet.

📁 Similar Datasheet

74HCT1G66 - Bilateral switch (Philips)

74HCT1G00 - 2-input NAND gate (Philips)

74HCT1G02 - 2-input NOR gate (Philips)

74HCT1G04 - Inverter (NXP)

74HCT1G08 - 2-input AND gate (NXP)

74HCT1G08 - 2-input AND gate (Philips)

74HCT1G08-Q100 - 2-input AND gate (NXP)

74HCT1G125 - Bus buffer/line driver (Philips)

74HCT1G126 - Bus buffer/line driver (Philips)

74HCT1G14 - Inverting Schmitt-trigger (Philips)

Full PDF Text Transcription

Click to expand full text

74HC1G66-Q100; 74HCT1G66-Q100 Single-pole single-throw analog switch Rev. 2 — 27 January 2022 Product data sheet 1. General description The 74HC1G66-Q100; 74HCT1G66-Q100 is a single-pole, single-throw analog switch with two input/output terminals (nY and nZ) and a digital enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. The HCT device features control inputs with reduced input threshold levels to allow interfacing to TTL logic levels. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.

Published: Jul 29, 2019 |