74HCT4066-Q100 Datasheet PDF - nexperia Quad single-pole single-throw analog switch Specs

74HCT4066-Q100 - Quad single-pole single-throw analog switch

This page provides the datasheet information for the 74HCT4066-Q100, a member of the 74HC4066-Q100 Quad single-pole single-throw analog switch family.

Datasheet Summary

Description

The 74HC4066-Q100; 74HCT4066-Q100 is a quad single pole, single throw analog switch.

Features

Automotive product qualification in accordance with AEC-Q100 (Grade 1).
Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
Input levels nE inputs:.
For 74HC4066-Q100: CMOS level.
For 74HCT4066-Q100: TTL level.
Low ON resistance:.
50 Ω (typical) at VCC = 4.5 V.
45 Ω (typical) at VCC = 6.0 V.
35 Ω (typical) at VCC = 9.0 V.
Specified in compliance with JEDEC standard no. 7A.
ESD protection:.

Datasheet Details

Part number	74HCT4066-Q100
Manufacturer	nexperia
File Size	301.90 KB
Description	Quad single-pole single-throw analog switch
Datasheet	74HCT4066-Q100 Datasheet
Additional preview pages of the 74HCT4066-Q100 datasheet.

📁 Similar Datasheet

74HCT4066 - Quad single-pole single-throw analog switch (NXP)

74HCT4060 - 14-stage binary ripple counter (NXP Semiconductors)

74HCT4060-Q100 - 14-stage binary ripple counter (NXP)

74HCT4067 - 16-Channel Analog Multiplexer/Demultiplexer (NXP)

74HCT4002 - Dual 4-input NOR gate (NXP)

74HCT4002-Q100 - Dual 4-input NOR gate (NXP)

74HCT4002D-Q100 - Dual 4-input NOR gate (NXP)

74HCT401 - 8-bit synchronous BCD down counter (Philips)

74HCT40102 - 8-bit synchronous BCD down counter (Philips)

74HCT40103 - 8-bit synchronous binary down counter (Philips)

Full PDF Text Transcription

Click to expand full text

74HC4066-Q100; 74HCT4066-Q100 Quad single-pole single-throw analog switch Rev. 4 — 14 April 2020 Product data sheet 1. General description The 74HC4066-Q100; 74HCT4066-Q100 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.

Published: Jul 29, 2019 |