Datasheet4U Logo Datasheet4U.com

74LVC125A-Q100 - Quad buffer/line driver

General Description

The 74LVC125A-Q100 consists of four non-inverting buffers/line drivers with 3-state outputs (nY) that are controlled by the output enable input (nOE).

A HIGH at nOE causes the outputs to assume a high-impedance OFF-state.

Inputs can be driven from either 3.3 V or 5 V devices.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • 5 V tolerant inputs/outputs for interfacing with 5 V logic.
  • Wide supply voltage range from 2.3 V to 3.6 V.
  • CMOS low power consumption.
  • Direct interface with TTL levels.
  • Complies with JEDEC standard:.
  • JESD8-7A (1.65 V to 1.95 V).
  • JESD8-5A (2.3 V to 2.7 V).
  • JESD8-C/JESD36 (2.7 V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC125A LOW VOLTAGE CMOS QUAD BUS BUFFERS STMicroelectronics
74LVC125A Quad buffer/line driver NXP
74LVC125A QUADRUPLE 3-STATE BUFFERS Diodes
74LVC125A Low-Voltage CMOS Quad Buffer ON Semiconductor
74LVC125 Quad buffer/line driver Philips

Other Datasheets by Nexperia

Part Number Description
74LVC125A Quad buffer/line driver
74LVC126A Quad buffer/line driver
74LVC126A-Q100 Quad buffer/line driver
74LVC126AD Quad buffer/line driver
74LVC10A Triple 3-input NAND gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC125A-Q100 Quad buffer/line driver with 5 V tolerant inputs/outputs; 3-state Rev. 2 — 5 May 2020 Product data sheet 1. General description The 74LVC125A-Q100 consists of four non-inverting buffers/line drivers with 3-state outputs (nY) that are controlled by the output enable input (nOE). A HIGH at nOE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.