Datasheet4U Logo Datasheet4U.com

74LVC162245A-Q100 - 16-bit transceiver

General Description

The 74LVC162245A is a 16-bit transceiver with 30 Ω termination resistors and 3-state outputs.

The device can be used as two 8-bit transceivers or one 16-bit transceiver.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Overvoltage tolerant inputs to 5.5 V.
  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low power dissipation.
  • Multibyte flow-through standard pin-out architecture.
  • Low inductance multiple power and ground pins for minimum noise and ground bounce.
  • Direct interface with TTL levels.
  • In.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC162245A 16-bit transceiver Philips
74LVC162373A 16-bit D-type transparent latch Philips
74LVC162374A 16-bit edge triggered D-type flip-flop Philips
74LVC16240A 16-bit buffer/line driver Philips
74LVC16244A 16-bit buffer/line driver NXP Semiconductors

Other Datasheets by Nexperia

Part Number Description
74LVC162245A 16-bit transceiver
74LVC162245ADGG 16-bit transceiver
74LVC162245ADGV 16-bit transceiver
74LVC162245ADL 16-bit transceiver
74LVC162244A 16-bit buffer/line driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC162245A-Q100 16-bit transceiver with direction pin; 30 Ω series termination resistors; 5 V tolerant input/output; 3-state Rev. 3 — 23 September 2021 Product data sheet 1. General description The 74LVC162245A is a 16-bit transceiver with 30 Ω termination resistors and 3-state outputs. The device can be used as two 8-bit transceivers or one 16-bit transceiver. The device features two output enables (1OE and 2OE) each controlling eight outputs, and two send/receive (1DIR and 2DIR) inputs for direction control. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.